Re: MT14L2 Wheels

[Bud <bstych@gtii.com>]

Why don't you send wife to a self-service car wash with the wheels, get
as much of the grease off that way, then do the solvent soak on both the
wheels and your wife.

In all sincerety, if you do use the car wash, BE SURE TO WEAR GOGGLES
and dress appropriately.

Be aware of possibly igniting the grease if you do the propane torch
bit.

Cheers,

Bud Stych
Traverse City, MI


M19SOORKB@Prodigy.Net wrote:
> 
> Why don't you just let the wheels soak fully submerged in solvent for a week?
> Any residue should come right off after that ......  Just be sure that solvent vapors
> are not a problem while you are doing this .....  You may have to buy several
> gallons of solvent to do this however ......
> 
> > My goal is to remove the grease, so I can have the
> > wheels sand blasted to remove the rust, and then paint.  Once I get the
> > wheels clean, were they painted black?

> > Brian in Brighton
> >